Exclusive Products
CRY8124 Acoustic Imaging Camera
The CRY8124 acoustic imaging camera excels at pinpointing leaks, identifying electrical partial discharge, and detecting mechanical deterioration. The CRY8124 sets a new standard for sensitivity and efficiency. Featuring 200 microphones (the most in the industry), the CRY8124 allows smaller leaks and partial discharges to be detected at a greater distance. The CRY8124 reporting software allows offline analysis, editing, and report generation, simplifying regular maintenance routines.
Features
With 200 microphones, 100kHz bandwidth, and the fastest processor in the industry, the CRY8124 can pinpoint smaller leaks and partial discharges at a greater distance than any other system.
CRY2623 Industrial Acoustic Imager (Superior Version)
CRY2623 is a hand-held industrial acoustics imager that supports ultrasonic frequency band.The instrument uses the microphone array beamforming technology to acquire the sound source distribution data, and collects the video images in real time with the high-definition camera. By integrating the sound source distribution data with the video image, the changing sound source is dynamically presented on the display screen.
Features
- The equipment is simple and convenient to operate, and can be used quickly. It only needs to adjust two parameters, the test frequency range and test dynamic range to meet the vast majority of test requirements.
- Support camera mode, video mode,and the data recording on the job site is flexible.
- Large capacity TF data memory card can be expanded also test results can be exported and reported quickly.
- Support leak assessment function to evaluate the leak level and leak volume.
- It features PC-based Report Generation Software, just one click to export test reports.
- Support ultrasonic monitoring.
- High efficiency, instant imaging, rapid positioning of fault points in the screen.
CRY2624 Industrial Acoustic Imager (ATEX Version)
Features
- The equipment is simple and convenient to operate, and can be used quickly. It only needs to adjust two parameters, the test frequency range and test dynamic range to meet the vast majority of test requirements.
- Support camera mode, video mode,and the data recording on the job site is flexible.
- Large capacity TF data memory card can be expanded also test results can be exported and reported quickly.
- Support leak assessment function to evaluate the leak level and leak volume.
- It features PC-based Report Generation Software, just one click to export test reports.
- Support ultrasonic monitoring.
- High efficiency, instant imaging, rapid positioning of fault points in the screen.
The Cable Spiking and Cutting Tools ultra-safe are integrated electrohydraulic cable cutters without hydraulic hose to check the absence of voltage on underground power cables. Use the following cables:
Uses
- 2 actions combined into one single tool (spiking and cutting)
- Enables the user to limit any resulting short circuit to a single-phase / ground fault when spiking multi-core cables. This causes any protective devices to trip before a 2 or 3 phases fault can be created
- In the event of spiking a live cable, the spiking blade can be replaced easily (minimising cost impact)
- MOS INDUSTRIE: 20 years of expertise
- No physical connection between the tool and the user
- Damage to infrastructure is minimised when spiking as a single phase to earth fault is created using a dedicated, local 70mm copper earthing cable
- Cutting failure sensor
- Indication on the remote at the end of the cutting operation
- Hydraulic over-pressure safety valve
- Battery charge status indicator
- Prevents the start of cutting if the battery is low
- Maximum Cable diameter – 140 mm
Voltage Alarm with Headlamp
A PROFESSIONAL QUALITY MULTI-BEAM LAMP
ALADIN is equipped with an integrated high-performance LED
headlamp and professional lenses for excellent light quality
and will adapt to any requirements.
ALADIN is fitted with two light beams, suitable for all uses
Technical Specification & Ordering Information
- 360 detection of electric field 50 & 60 Hz around the worker.
- Convenient for outdoor and indoor electrical systems
- Detects the level of electric field. It does not measure the distance of the source of the electric field
- Higher is the voltage, bigger is the distance of detection.
- It may even detect low voltage near wall outlet (Only on 2 400kV version).
- Range of use up to 400 kV environments
- Battery capacity 2000mAh
- Temperature: -25° +55° C
- Humidity: up to 96%.
- Dimensions: 87 x 60 x 34 mm / Weight: 98 g
Uses
Example of situation where ALADIN individual voltage alarm with headlamp provided an efficient warning.
- Misunderstanding: the operator approach the wrong spot
- Voltage unexpected return: Mistake during an operation on disconnected network
- Involuntary approach: Quick move in direction of energized area during operation
- Diversion: the operator is diverted by a bad news or urgency and moves toward a high potential energized conductor unconsciously
In all these situations and many others ALADIN will provide the ultimate Warning.
Advantages
Sound alert of voltage proximity which rhythm increases up on the level of electric field detected.
The “smart mute” is a Dynamic Voltage Detection:
- It is used to silence the warning sound once at working place, the device is remaining in vigilance and still measuring the electric field.
– The warning sound will automatically restart in case of increase of the level of detected electric field (closer or sudden presence of voltage).
– Acts as an additional fencing which can be set at the working place. - The device is designed like head light to be fixed on helmets or hard hats by various means. In this position, the device will detect 360°around the operator.
- No influence of the electromagnetic fields.
- 2 types of light are available :
− 1 light for remote vision (overhead lines, poles, …)
− 1 light for closer vision (walking trip, working place, …) - Light and compact device.
- Rechargeable by standard micro USB 5 V plug.